Tsi IAQ50 Manual de usuario descargar pdf (Pagina 20)

If the measurement is not acceptable or

the value is not yet stable, wait a minute

and then take another reading to over-

write the value on the top line.

Once the top line value is acceptable,

press the 5 or 6 keys to move the icon

to either Supply or %OA, whichever

reading you are prepared to make next.

Repeat the procedure with both a Sup-

ply measurement and an Outside Air

measurement.

Remember, the top line measurement is

what will be used in the calculation.

Once all three readings are stored, press

the 5 or 6 keys to advance to %OA.

“OA%” will appear on the display along

with the % outside air value. To put this

%OA value and the values from the

three other modes into memory, press

the READ/ENTER key.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Sin comentarios

Tsi IAQ50 Manual de usuario Pagina 20