Tsi IAQ50 Manual de usuario descargar pdf (Pagina 21)

Note: “Err” will display if not enough

information is available or a negative %

value is calculated.

To make changes to one of the other

three readings without putting these

values to memory yet, press the 5 or 6

keys to review the values and press

READ/ENTER to overwrite the value.

To exit this procedure completely with-

out putting any values to memory, press

NEXT TEST.

To take another % outside air measure-

ment, make sure you pressed

READ/ENTER to put the values to mem-

ory. Then use the 5 or 6 keys to review

the measurements and take new samples

for supply and return. The stored Out-

side Air reading can be used in all per-

centage calculations, unless you input a

new value.

BP Key

To change the stored barometric pres-

sure, press BP and use the 5 or 6 keys

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Sin comentarios

Tsi IAQ50 Manual de usuario Pagina 21